Honda XRE300 Owner's Manual page 128

XRE300 · XRE300A
Tread Wear
Replace tyres before tread depth at the center of the
tyre reaches the following limit:
Minimum tread depth
Front
Rear
(2)
(1)
3.0 mm (0.12 in)
3.0 mm (0.12 in)
(1) Tyre tread depth
(2) Wear indicator
location mark
Tube Repair and Replacement
If a tube is punctured or damaged, you should replace
it as soon as possible. A tube that is repaired may not
have the same reliability as a new one, and it may
fail while you are riding.
If you need to make a temporary repair by patching
a tube or using an aerosol sealant, ride cautiously at
reduced speed and have the tube replaced before you
ride again. Any time a tube is replaced, the tyre should
be carefully inspected as described on page 29.
31
(Cont.)