Initial Setup (Type 1) Setup Via Smartphone - Tanita BC-402 Instruction Manual

Initial Setup (Type 1) Setup via Smartphone

1.
Turn the Bluetooth
® setting on and download the "Health Planet" app.
iPhone 4S (of higher)/AndroidTM 4.4 (or higher)
Apple, the Apple logo, and iPhone are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC. Android is a trademark of Google LLC.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
®
TANITA Corporation is under license.
Note:
If you are not using an app, enter settings manually in the Body Composition
Monitor (P.10) before using.
If you purchase a new smartphone, be sure to adjust the registration of your
Body Composition Monitor accordingly.
Approximate signal range: 5 m in areas without obstructions
2.
Launch the app. You need to register as a member to use the Health Planet app.
After registering, login with your registered details.
3.
Select "Input Data", then select "Input from BCM".
select "BC-402" in the next screen.
Note:
When taking measurements while holding your smartphone, enter the weight
that you want to subtract into the "Smartphone's weight" section in the
dedicated app before taking measurements.
4.
Check the Body Composition Monitor is off, and tap the "Add Device" button.
Follow the instructions in the app.
Note:
Compatible apps may be changed or added, in which case screen displays
and operation methods will vary accordingly. Contact tanita.asia with any
questions or concerns.
The screen displays and instructions may differ depending on the app
specifications.
8
*Bluetooth Low Energy supported