Taking Weight And Body Fat Readings - Tanita BC-402 Instruction Manual

Taking Weight and Body Fat Readings

After programming your personal data you are ready to take a reading.
1. Step onto the scale
Step onto the scale while the scale is off, the scale turns on automatically and starts measuring.
2. Get Your Readings
After the measurement is taken, readings will be automatically displayed in the order listed below.
After the last result reading is displayed, the weight reading will again appear, then the unit will automatically shut off.
The user may use the
For advanced scrolling, the user may press and hold the
view the result and readings will appear for 40 seconds before the unit automatically shuts off.
Note: Do not step off until "
If the wrong personal number appears on the display
You can change the personal number by using the
Press the or button until your personal number and profile appears.
After you select your correct personal number and press the SET button, the display will show your correct readings automatically.
The results will be stored in the memory under your personal number.
14
button to scroll through the different results.
/ " disappears.
button until the required reading is displayed. Release the button to
button.