Table of Contents Introduction......................1 Features and Functions ..................1 For Your Safety .....................2 Preparations Before Use ..................4 Getting Accurate Readings ..................4 Automatic Shut-down Function ................4 Changing the Weighing Unit .................5 Setting (Resetting) Date and Time ...............5 Setting and Storing Personal Data in Memory .............6 Taking Weight and Body Fat Readings ..............7 Programming the Guest Mode ................8 Taking Weight Measurement Only ...............8...
This Body Composition Monitor is intended for adults and children (age 5-17) who have inactive to moderately active lifestyles, and adults with athletic lifestyles. Thanks to major investment in the latest BIA Technology and sports science research, TANITA has upgraded the Athlete Mode function to make measurements more accurate and suitable for a wider range of users.
Implementing weight loss measures and exercise programmes based on self-analysis could be harmful to your health. Always follow the advice of a qualified professional. The Tanita Body Composition Monitor product provides readings for informational purposes only. This product is not intended to diagnose or treated any disease or abnormalities. Please consult with your physician about any questions or concerns related to your health.
Page 5
Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement. Avoid excessive impact or vibration to the monitor. Doing so may damage the monitor or cause it to malfunction,or may cause setting to be erased. Do not use or store this monitor in the following locations.
Preparations Before Use Inserting the Batteries Open as shown Open the battery cover on the back of the monitor. Insert the supplied AA-batteries as indicated. Note: Be sure that the polarities of the batteries are set properly. If the batteries are incorrectly positioned, battery fluid may leak and damage the floor.
Changing the Weighing Unit Note: Only for use with models that have the unit switching button. The weighing unit can be changed using the switch on the back of the monitor. Press the SET button when the display is blank. When “0.00kg” (or “0.0lb”, “0.0stlb”) appears on the display, press the Unit Switching button underside of the monitor to switch the weighing unit.
Setting and Storing Personal Data in Memory The monitor can only be operated if data has been programmed into one of the personal data memories. 1. Turn on the Power Press the Set button to turn on the monitor. The monitor beeps to confirm activation, the Personal data number is displayed, and the display flashes. Note: If you don’t operate the monitor for 60 seconds after the monitor has been turned on, it turns off automatically.
Taking Weight and Body Fat Readings After programming your personal data you are ready to take readings. 1. Step onto the Monitor Step onto the monitor while the monitor is off; the monitor turns on automatically and starts measuring. 2. Get Your Readings After the measurement is taken, readings are automatically displayed in the order listed below.
Programming the Guest Mode Guest mode allows you to program the monitor for one-time use without reading a personal data number. Press the Guest button to activate the monitor, and then set the age, select Female or Male and specify the height. Step onto the monitor after “0.0”...
Specifications Disposal BC-G01 This is an electronic device. Weight Capacity Please dispose of it as an electronic device, not 150kg (330lb) (23st 8lb) as general household waste. Please follow the Weight Increments regulations in your local region when disposing of 0 to 150kg/0.1kg...
Need help?
Do you have a question about the BC-G01 and is the answer not in the manual?
Questions and answers