Adjusting The Delay Between The Picture And Sound - Sony DAV-HDX274 Operating Instructions Manual

• [FAST]: You can set the duration shorter
than [NORMAL].
• [SLOW 1]: You can set the duration
longer than [NORMAL].
• [SLOW 2]: You can set the duration
longer than [SLOW 1].
4
Press
Note
• Some JPEG image files may take longer to display
than the option you selected. Especially progressive
JPEG image files or JPEG image files of 3,000,000
pixels or more.
• Duration of interval depends on the [JPEG
RESOLUTION] setting in [HDMI SETUP]
(page 47).
To select an effect for JPEG
image files in the slide show
1
Press
The Control Menu display appears on the
TV screen.
2
Press X/x to select
then press
The options for [EFFECT] appear.
3
Press X/x to select a setting.
• [MODE 1]: The JPEG image file sweeps
in from top to bottom.
• [MODE 2]: The JPEG image file stretches
out from left to right of the TV screen.
• [MODE 3]: The JPEG image file stretches
out from the center of the TV screen.
• [MODE 4]: The JPEG image files
randomly cycle through the effects.
• [MODE 5]: The next JPEG image file
slides over the previous image.
• [OFF]: Off.
4
Press
Note
• The [EFFECT] setting is not effective when you set
[JPEG RESOLUTION] in [HDMI SETUP] to [(1920
× 1080i) HD
42
US
.
DISPLAY twice.
[EFFECT],
.
.
] or [(1920 × 1080i) HD] (page 48).
Adjusting the Delay
Between the Picture and
Sound
[A/V SYNC]
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1
Press DISPLAY.
The Control Menu display appears on the
TV screen.
2
Press X/x to select
then press .
The options for [A/V SYNC] appear.
3
Press X/x to select a setting.
• [OFF]: Off.
• [ON]: You can adjust the difference
between picture and sound.
4
Press .
Note
• Depending on the input stream, [A/V SYNC] may not
be effective.
[A/V SYNC],