Sony DAV-HDX274 Operating Instructions Manual page 74

Symptom
The system does not work
normally.
The Control for HDMI function
does not work.
No sound is output from the
system and TV while using the
System Audio Control function.
74
US
Remedy
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• When "HDMI" does not light up in the front panel display, check the HDMI
connection (page 15).
• Set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 48).
• Make sure that the connected component is compatible with the [CONTROL
FOR HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set the [CONTROL FOR HDMI]
setting in [HDMI SETUP] to [OFF], then set the [CONTROL FOR HDMI]
setting in [HDMI SETUP] to [ON] (page 48).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 55).
• Set the [AUDIO (HDMI)] setting in [CUSTOM SETUP] to [ON] (page 48).
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 55).