Step 3: Performing The Quick Setup - Sony DAV-HDX274 Operating Instructions Manual

Step 3: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Note
• When you connect the system and the TV with the
component video cord (not supplied) or HDMI cable
(supplied), you need to set the type of video output for
matching your TV. For details, see "Setting the type
of video output to match your TV" (page 23).
C/X/x/c,
1
Turn on the TV.
2
Press [/1 on the unit.
Note
• Make sure that the function is set to "DVD"
(page 24).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 22) and perform
again.
4
Press without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
"/1
7
Press X/x to select the setting that
DISPLAY
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 46)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 46)
8
Press
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page 59).
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
.
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 LETTER BOX
4:3 OUTPUT:
BLACK LEVEL: 4:3 PAN SCAN
BLACK LEVEL
(COMPONENT OUT)
PAUSE MODE:
.
SPEAKER FORMATION
STANDARD
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
: 16:9
OFF
:
AUTO
21
US