Related Manuals for Trotec BX11
Summary of Contents for Trotec BX11
- Page 1 BX11 / BX11F DE EN FR IT ES NL PT PL RU DA SV NO FI BEDIENUNGSANLEITUNG OPERATING MANUAL MANUEL D'UTILISATION...
-
Page 2: Safety Instructions
• Connect the measuring instrument to the respective consumer SAFETY INSTRUCTIONS exclusively via the power cord. To avoid damage due to leverage effects, never plug the consumer directly into the measuring instru- Please read this owner’s manual carefully before you use your energy meter ment, as it may be too heavy! and please make sure that this manual either remains with the device or is kept within close range! Although this device was subjected to extensive... -
Page 3: Intended Use
• Do not leave any packing material lying around. All packaging mate- - The BX11/BX11F is only approved for use with 230 V AC. rial must be disposed of immediately as it can pose a serious health hazard to children. -
Page 4: Product Description
Degrees of contamination PRODUCT DESCRIPTION The following are the degrees of contamination as specified according to IEC 664: - Degree of contamination 1 No or only dry non-conductive contamination. - Degree of contamination 2 Dry, non-conductive contamination only. Occasional temporary con- ductivity through dewing must be reckoned with. - Page 5 Power supply/Settings B. How to carry out settings for energy tariffs and times The symbol which indicates that the battery power is low should disap- 1. Press the “SET” key to get to “Tin” (time in) in order to enter the time pear after the batteries have been inserted.
-
Page 6: Maintenance
D. The device will return to its original setting if you fail to press a key 2. Display mode for the current voltage, amperage and the total within 5 seconds or press the “t”-key. recording time. E. Press the “t”-key and hold for longer than 3 seconds to delete all data (the time and day are not deleted). -
Page 7: Technical Data
• Do not immerse in water. For indoor use in rooms up to 2.000 m (6,560 ft ) MSL only. Only one energy meter may be used at a time to calculate • Maintenance work may only be carried out by authorised and trained the energy costs.