Ipv4 - L2Tp - D-Link AX1500 Product Overview

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses an L2TP connection. Your ISP will
provide you with a username and password. Click Save at any time to save the changes you have made on this page.
L2TP Server Enter the L2TP server IP address provided by your ISP.
Username Enter the username provided by your ISP.
Password Enter the password provided by your ISP.
Reconnect Mode Select Always on, On Demand, or Manual.
Maximum Idle Time Configurable when On Demand is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select Always on or
Manual as the reconnect mode. The default is 5 minutes.
Address Mode Select Static IP if the following information is given by your ISP:
IP address, subnet mask, gateway, and DNS server addresses.
In most cases, select Dynamic IP.
Advanced Settings... - Dynamic IP
Address Mode
Shows your chosen address mode.
Primary DNS Server
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS Server
Enter the secondary DNS server IP address assigned by your
ISP.
D-Link R15 User Manual
Advanced Settings...

IPv4 - L2TP

34