Ipv4 - Pptp - D-Link AX1500 Product Overview

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will
provide you with a username and password. Click Save at any time to save the changes you have made on this page.
PPTP Server Enter the PPTP server's IP address or name provided by your
ISP.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Reconnect Mode Select Always on, On Demand, or Manual.
Maximum Idle Time Configurable when On Demand is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select Always on as
the reconnect mode.
Address Mode Select Static IP if the following information is given by your ISP:
IP address, subnet mask, gateway, and DNS server addresses.
In most cases, select Dynamic IP.
Advanced Settings... - Dynamic IP
Address Mode
Shows your chosen address mode.
Primary DNS Server Enter the primary DNS server IP address assigned by your ISP.
D-Link R15 User Manual
Advanced Settings...

IPv4 - PPTP

32