Ipv4 - Pppoe - D-Link AX1500 Product Overview

Section 3 - Configuration
Select PPPoE (Point-to-Point Protocol over Ethernet) if your ISP requires you to enter a PPPoE username and password in
order to connect to the Internet. Click Save at any time to save the changes you have made on this page.
Username Enter the username provided by your ISP.
Password Enter the password provided by your ISP.
Reconnect Mode Select either Always on, On Demand, or Manual.
Maximum Idle Time Configurable when On Demand is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select Always on or
Manual as the reconnect mode. The default is 5 minutes.
Address Mode Select Static IP if the following information has been provided
by your ISP: IP address, MTU, and DNS server addresses. In most
cases, select Dynamic IP.
Advanced Settings... - Dynamic IP
Address Mode
Shows your chosen address mode.
Service Name
Enter the ISP service name (optional)
Primary DNS Server
Enter the primary DNS server IP address assigned by your ISP.
D-Link R15 User Manual

IPv4 - PPPoE

Advanced Settings...
30