Table of Contents
Advertisement
Preparation (continued)
Setting the lens type
Confirm the [LENS TYPE] setting for PT-MZ880 / PT-MZ780 / PT-MZ680.
Change the setting if the type does not match this projection lens.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
PROJECTOR SETUP
FUNCTION BUTTON
LENS
AUDIO SETTING
FILTER COUNTER
DC OUT
STATUS
DATA CLONING
SAVE ALL USER DATA
LOAD ALL USER DATA
HDMI CEC
INITIALIZE
SERVICE PASSWORD
MENU SELECT
SUB MENU
ENTER
Lens calibration
Perform lens calibration after attaching the lens.
For instructions on lens calibration, refer to "Projecting" in the operating instructions for
the projector.
1) Turn on the projector to start
1/2
2) Press the <MENU> button to
3) Select [PROJECTOR SETUP] in
4) Select [LENS] in the [PROJECTOR
2/2
5) Select [LENS TYPE] on the [LENS]
ON
ON
6) Press the <ENTER> button.
the projection.
display the [MAIN MENU] screen.
the main menu and then press
the <ENTER> button.
SETUP] menu and then press the
<ENTER> button.
z The [LENS] screen appears.
screen and then use the ▲▼
buttons to select [ET-ELU20].
ENGLISH-7
Advertisement
Table of Contents
