Klein Tools VDV Commander VDV501-097 Quick Start Manual page 10

To ensure safe operation and service of the tester, follow
instructions. Failure to observe these warnings can result in
severe injury or death.
The VDV Commander is designed for use on cabling systems
with or without voltage.
• The Voltage! icon turns on when the voltage exceeds Safety Extra
• It is NOT recommended to use the VDV Commander when the
•
1.800.561.8187
Low Voltage (SELV) rating of 60 Volts peak AC or DC.
Voltage! icon is present.
voltage source exceeds 60 Volts peak AC or DC may pose a safety
hazard for the user.
Internal components are protected up to 400 Volts peak AC or DC.
SYMBOLS:
WARNING:
Caution: Potential for damage or destruction to equipment.
Always wear approved eye protection.
Do NOT use on energized circuits.
Conformité Européenne. Conforms with
European Economic Area directives.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance
with local regulations.
www.
WARNINGS
Operating the VDV Commander when a
Potential for personal injury.
.com
information@itm.com