PNI Hunting 400C User Manual page 18

EN
Other
Language English...
Auto/Manual
Auto: the camera will synchronize the date and time after entering the
time zone
Date/Time Manual: set the date and time manually
date : Month : year; hour : minute : second
Note: Set the date / time of the camera to make certain functions work
as expected.
Print the camera ID, moon phase, temperature, date and time on the
Stamp
photo
Battery Alkaline/ NI-MH
Type Select the type of batteries inserted into the camera.
50Hz/60Hz
Frequency
Incorrect frequency setting may cause the screen to blink under certain
conditions.
ON/OFF
SD Cycle
ON: the camera will continue to save new images by deleting the oldest
ones
Return to factory settings.
Reset
Yes / No
FW
The firmware update file must be saved on the SD card.
Update
About Firmware Version (Version:/IMEI:/MCU:/MOD:)
18 User manual