Advertisement
Measurement input and range
Input signal
Mode
Input range
5 V (
)
AC voltage
50 V (
)
0.1 ~ 9999 Hz
500 V (
)
※ Maximum range of display scale
-1.999 ~ 1.999 / -19.99 ~ 19.99 / -199.9 ~ 199.9 / -1999 ~ 9999
the displaying range of expression changes depending of the set-up location of a decimal point
Comparative output action ( )
Operation
Output operation
mode
It does not operate under the initial
Initializing set value
Push the button
sequancely with pushing the
And then
is displayed. When displaying
and the all default value is initialized.
(* Initializing set value is not available when
Error display code
"
" : This will be displayed when a measured input value exceeded max display range
(9999 4digits) or when negative valve is indicated with in normal mode. Normal mode : SCH 0 or SCL 0
"
" : Error message will be displayed when a setting value of High Comparative Output is less than that of
Low Comparative Output
"
" : When input is less than min measurement range 0.1 ㎐
Parameter composition and setting method
▒ Parameter 1 ( Key - keep pushing the button(min 2 sec))
keep pushing
key(min 2 sec) and
find the parameter 1 set up mode
Key
set up start
Default value :
1. Set the input range
Key
Key
set up start
Default value :
2. Magnification setting
Key
Key
set up start
3. Displayed value error
Default value :
compensation
Key
Key
set up start
4. Display input
Default value :
average value
Key
Key
set up start
Default value :
5. High scale setting
Key
Key
set up start
6. Low scale setting
Default value :
Key
Key
set up start
7. Set position of
Default value :
a decimal point
Key
Key
8. Max value
set up start
Default value :
auto holding
Key
Key
set up start
9. Lock function
Default value :
setting
Key
※
: This is the set-up value when input pulse frequency is within 0.1 second and this value can change if
the input impulse frequency exceeds 0.1 second.
Display range Input impedance
Accuracy
100 ㏀
0.1 ~ 9999
1 ㏁
±5 Digit max.
5 ㏁
Explanation
H : Hysteresis
No output operation
Current indication value ≦
value,
LO output becomes ON.
Current indication value ≧
value,
GO output becomes ON.
Current indication value ≧
value,
HI output becomes ON.
Current indication value ≦
value,
GO output becomes ON.
Current indication value ≦
value,
LO output becomes ON.
Current indication value ≧
value,
HI output becomes ON.
Current indication value ≺
,
GO output becomes ON.
Current indication value ≧
value,
LO output becomes ON.
Current indication value ≧
value,
HI output becomes ON.
Current indication value ≺
and
GO output becomes ON.
Same as the
operation but LO output will not
operate under the initial setup value of
.
It starts to operate from the next value of
.
, push again the
button
on.)
Key
set up
Key
completed
9.999
99.99
999.9
9999
set up
Key
Key
set up
set up
1.800 (magnification)
completed
To move the position of the
0.500 (magnification)
number then press
key
Key
set up
Key
completed
+99 (Max value error compensation)
set up
-99 (Min value error compensation)
Key
0.1
0.2
0.3
0.5
0.8
set up
sec
sec
sec
sec
sec
Key
completed
set up
2.0
2.5
3.0
4.0
5.0
sec
sec
sec
sec
sec
Key
set up
Key
9.999 (Max value of high scale setting)
completed
set up
-1.999 (Min value of high scale setting)
To move the position of the
number then press
key
Key
Key
set up
9.999 (Max value of low scale setting)
set up
completed
To move the position of the
-1.999 (Min value of low scale setting)
number then press
key
Key
set up
Set the position of decimal point
Key
completed
set up
Key
set up
Key
completed
OFF
H-Hd
L-Hd
E-Hd
set up
Key
set up
Key
completed
OFF
ON
set up
▒ Parameter2 ( Key -shortly push the button (below 2 sec)
Display function of
the max input value
Key
Display function of
the min input value
Key
Set up the max
comparative output
value
Key
Set up the min
comparative output
value
Key
Set the comparative
output mode
Key
Hysteresis Selection
▒ Lock key ( Key - keep pushing the button(min 2 sec))
Key
※ every parameter set up is not available when the
,
▒ How to change the parameter set value
1. Pressing
key more than 2 sec within the RUN MODE will enter into the Parameter 1 and
pressing
key less than 2 sec will enter into the parameter 2.
Set value :
2. Able to select the parameter by pressing
.
parameter and set value repeatedly flickers in the display unit.
3. Able to change the set value by pressing the
in the display unit(when set value is 0, only the 0 th digit of constant value flickers and displayed)
Set value :
When changing the setting of constant value, able to perform the position shifting by using
Example)
When set value is constant, only 0 th digit of the constant value will flicker in the display unit.
Set value :
In order to change the value on 100 th digit, press the
position of the digit will shirt to the left and selected digit will flicker in the display unit.
When setting is completed, return to the parameter mode by pressing the
parameter and set value repeatedly. Able to return to the RUN mode by pressing the
▒ Slope setting method
When users want to display 3600 (min -1999 ~ 9999) within the 1000 Hz input, setting the parameter is as follows.
1. Enter into the parameter 1 by pressing the
2. Set
in the
3. Set
in the
(slope low value) parameter by using shift, up and down key.
Finish the setting just like above and return to the RUN mode by pressing the menu key.
Parameter
Set value
▒ Input of peak value and hold by external input
Detect the input peak value through the set-up of parameter or detect the displayed value by
external pressure, or hold the displayed value by external pressure.
: Disuse
: Hold the maximum value
▒ Transmission function (Auxiliary output)
1.0
1.5
● All electrical current : Show the output 4 - 20 ㎃ d.c of current displayed value. (Resolution 12000)
sec
sec
● PNP output (Output of open collector being below 12 - 24 V d.c 50 ㎃)
● NPN output (Output of open collector being below 12 - 24 V d.c 50 ㎃)
● RELAY output (250 V a.c 5 A below) 1a × 3
Dimension and Panel cutout
▒ MP3-H
▒ MP6-H
4
shortly push the
button(below 2 sec) and find the parameter 2 set up mode
set up
Key
max.
Display of the max
completed
input value
value default
set up
Key
Display of the min
min.
completed
input value
value default
Key
Key
set up
set up the max
set up start
set up
completed
comparative output value
To move the position of the
number then press
Key
Key
set up
set up the min
set up start
completed
set up
comparative output value
To move the position of the
number then press
Key
set up
set up start
Set the comparative
Key
completed
output mode
set up
Key
Key
set up
set up start
Default value : 01
set up
completed
To move the position of the
number then press
Key - keep pushing the button(min 2 sec)
Key
Key - keep pushing the button(min 2 sec)
set up
Key
completed
Key
Default value :
set up
set up
completed
Key
Default value :
completed
set up
Default value :
on.
Key
Default value :
set up start
Set value :
Set value :
Key
set up start
Key로
Set value :
설정값 변경
,
key and within the selected parameter,
Key
set up start
Set value :
Set value :
Key
key and at this moment, set value flickers
set up start
Key로
Set value :
설정값 변경
Key
set up start
Set value :
Set value :
Key
set up start
Key
Set value :
set up
key 3 times. Each time when users press the
key for 2 sec
(slop high value) parameter by using shift, up and down key
Display value
Parameter 1
: Hold the minimum value
102.6
Key
Key
Key
9.999 (set up the max comparative output value)
-1.999 (set up the mix comparative output value)
key
Key
9.999 (set up the max comparative output value)
-1.999 (set up the mix comparative output value)
key
Key
LL.ot
HH.ot
LH.ot
HL.ot
IL.ot
Key
99 (max. value)
00 (min. value)
key
Key
set up
Key
OFF
ON
completed
set up
Key
OFF
ON
Key로
설정값 변경
Key로
설정값 변경
key.
Key
set up
key,
key. At this moment, flickers the
key again.
Input value
: Hold by external pressure
Advertisement
