When To Change The Motor Protection Filter; How To Change The Motor Protection Filter; When To Replace The Exhaust Filter Airclean; How To Replace The Airclean Exhaust Filter - Miele HS12 Manual

Table of Contents

Advertisement

 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
When to change the motor protection
filter
Replace this filter every time you start a
new packet of dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters (only available in selected coun-
tries).
How to change the motor protection
filter
 Open the dust compartment lid.
 Pull the dustbag out by the grip on
the collar.
 Unclip the filter frame and replace the
motor protection filter.
 Close the filter frame.
 Fit the dustbag into the holder as far
as it will go.
 Close the dust compartment lid.
When to replace the exhaust filter
AirClean
Replace this filter every time you start a
new packet of Miele dustbags. Every
packet of original Miele dustbags con-
tains one AirClean exhaust filter. Mul-
tipacks contain four AirClean filters
(only available in selected countries).
How to replace the AirClean exhaust
filter
Do not use more than one exhaust fil-
ter at a time.
 Open the dust compartment lid.
 Release the filter grille and raise it
upwards. Grasp the used AirClean
filter by the clean, unsoiled section
(see arrow) and take it out.
 Replace it with a new AirClean ex-
haust filter.
If you wish to fit an Active AirClean
30 or a HEPA AirClean 30 filter, see
"Maintenance - Replacing one type
of exhaust filter with another".
 Close the filter grille.
21

Advertisement

Chapters

Table of Contents
loading

Table of Contents