Preparing for use
Attach the suction hose
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
To detach the suction hose
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the suction hose to the
handle
Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following suction tubes, depend-
ing on model:
– EasyLock suction tube
– Comfort telescopic suction tube
To assemble the EasyLock tube
Hold the suction tube by the connec-
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi-
tion.
Slide the connection piece upwards
until it clicks into position.
11