Table of Contents
Advertisement
Then – move to Scan and make scanning. System will scan for channels and save them to channel list.
To install channels from satellite broadcasting, select Satellite and perform required settings according to
your actual satellite system configuration.
Satellite Tune
Satellite
01 Ku_Hispasat 30W-5/30W-6 30.0W
02 Ku_Intelsat 901 27.5W
03 Ku_Eutelsat 7 West A 7.0W
04 Ku_Eutelsat 5 West A/B 5.0W
05 Ku_Amos 3/7 4.0W
06 Ku_ABS 3A 3.0W
07 Ku_Intelsat 10-02 0.8W
08 Ku_Astra 4A 4.8E
09 Ku_Eutelsat 7B/7C 7.0E
Signal Level
Signal Quality
Delete
Select the satellite, you want to configure, and in most right column set correct DiSEqC port for it.
If you want to scan only some specific Transponder(-s) for it, check them in columns in the middle. If you
want to scan all transponders for satellite, just check satellite in most left column.
Repeat this for other satellites if they are present in your system.
Press BLUE button for scanning. System will scan for channels and save them to channel list.
To complete installation follow the instruction on the screen.
To scan more channels or to install channels of another TV system, after installation process completed,
select option Another Mode or Next to finish channel installation.
Channel installation
Antenna
Digital
Refer to Chapter 5.1 for more information for TV channel installation.
Congratulations! You have successfully completed the First time installation of your TV.
Transponder
001 10730 H 27500
002 10770 H 30000
003 10890 V 27500
004 10917 V 7500
005 10922 V 1667
006 10930 H 30000
007 11262 V 30000
008 11302 H 30000
009 11330 H 9140
Edit
Add
Another mode
0 Channels
Hispasat 30W-5/30W-6
LNB Type
09750/10600
LNB Power
Auto
22KHz
Auto
Unicable
O
IF Freq
1 1210
SatPosition
SatA
Toneburst
None
DiSEqC1.0
None
DiSEqC1.1
None
0
0
Scan
Next
11
Advertisement
Table of Contents
