Advertisement
Quick Guide
Adjusting the water softening system
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
• Unpack the test strip.
• Open the tap and let the water flow for approx. 1
minute.
• Dip in the test strip into the water for 1 second.
• Take out the strip from the water and shake it.
• Wait for 1 minute.
• Make the necessary adjustment according to the test
strip.
After detecting the water hardness:
1. When the Programme Selection knob is in Off position, press and hold the Start/Pause/
Cancel key and turn the Programme Selection knob clockwise by one level within 5
seconds. Once this time has elapsed, the product will enter the regeneration setting mode.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3.To adjust the new Water Hardness Level, move the Programme Selection knob to the
position that is suitable for your supply water. (see, Water Hardness Level Adjustment
Table)
**Programme Selection knob rotates in 5 steps regardless of the number of the
programmes contained on the machine.
4. Press "Start/Pause/Cancel" key for once to store the level you have selected.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
Advertisement
