Advertisement
Advertisement
Table of Contents
Related Manuals for Beko D 7081 E
Summary of Contents for Beko D 7081 E
- Page 3 Dear Customer, We wish that this product, manufactured at modern facilities with total quality notions, will deliver you the best performance. In order to guarantee this, please read this instruction manual thoroughly and keep it for your future reference.
-
Page 4: Table Of Contents
Contents Technical features Steps before operating Fullautomatic Washing Machine and safety precautions Preparation Program selection and washing operations Care and Maintanence Determining location and installation Helpful tips on stain removal Before calling service Page 3 Page 6 Page 8 Page 13 Page 19 Page 21 Page 24... -
Page 5: Technical Features
Technical features D 7081 E Models Maximum capacity (kg.) Height (cm.) Width (cm.) Depth (cm.) Net weight (kg.) Power requirement (V/Hz) 220/50 Nominal current Power 2100 Washing speed (rpm) Spin speed (rpm) cold water inlet D 7102 E D 7082 E D 7101 E D 7102 ES 220/50... -
Page 6: Your Washing Machine
Your Washing Machine Top lid Control panel Front door Kick plate Kick plate cover... -
Page 7: Steps Before Operating Fullautomatic Washing Machine And Safety Precautions
Steps before operating Fullautomatic Washing Machine and safety precautions • The current requirement in order for safe operation of this machine is 16 Ampheres. You will need to have a certified electrician to connect a 16 Amp fuse, if there is not enough current load. •... -
Page 8: Preparation
Preparation Attention! Before any operation of the machine check the following. • Did you close the front door? • Is the tap open? • Is water drain hose placed properly? • Is power connected? Sorting laundry Sort the laundry according to the following groups and wash them seperately: - white and resistant colored fabrics, - colored fabrics, - delicate fabrics (silk, rayon etc.),... -
Page 9: Detergent Dispenser
Detergent and softener selection Choose the appropirate detergent specifically used at the full automatic washing machines. Suggested amount is given on the detergent cover. Do not attempt to use detergents and bleaching elements that contain chlor and sulphur. The amount of the detergent depends on the dirt level of fabric, the amount of fabric and the softness of the water. -
Page 10: Control Panel
Control Panel Auxillary washing machine Program selection knob On/Off Button Program follower Spin speed selection Remain time Door open button Timedelay adjustment button Start/Pause/Cancel button... -
Page 11: Quick Wash
Functions Quick wash Shortens washing time for lightly soiled fabrics. This function can be used for cotton and synthetic programs for temperatures below 60° C. Rinse plus By using this function your machine will add another rinse process to the three rinse processes that it has already done. - Page 12 Program Selection and Washing Machine Operation Insert the plug. Press the On/Off button and then the Door Open button. Open the door. Place your laundry into the machine according to the recommended load capacity and close the front door. Select the proper program according to the dirt strength and the thermostat value by means of Program Selection Table given on the following pages.
-
Page 13: Program Selection
Program selection Programme Fabric type Heavy soiled fabrics made from cotton or linen, Cotton 90 heat resistant Normal soiled fabrics made from cotton or linen, Cotton 60* heat resistant Lightly soiled fabrics made from cotton, non-color Cotton 40 fast Heavy soiled fabrics made from cotton or linen, Intensive 60 heat resistant Normal soiled fabrics made from cotton/synthetics... -
Page 14: Child Lock
Child Lock To prevent the knobs from being played by your children you may activate “child lock” option. Activating the “Child Lock” option prevents any change from being made to a set program. To activate child lock, press both on the second and the fourth auxiliary function buttons together for 3 seconds after the machine starts the washing operation. - Page 15 Auxiliary Function Selection It is not possible to activate all auxiliary functions in all wash programs. If any auxiliary function is selected, its led will be on. It is restricted to select some auxiliary functions together. For example, if the cotton program is selected, “quick wash” and “pre-wash”...
- Page 16 End of the Program If all the wash programs are finished, all the leds on the program follower will be on . “1-2 minutes” for door open is displayed on remain time display. After1-2 min door open led will light up. At the end of the washing, all related leds on the control panel will be on.
- Page 17 Time Delay By using the time delay buttons, starting time of any program can be delayed. Time delay can be set at intervals of 30 min. On the display, the delayed starting time is added to the duration of the program. For example, if the program duration is 2 hours and 16 min and you delayed the program for 2 hours, the display will show “4:16”.
-
Page 18: Care And Maintanence
Care and maintanence Detergent dispensing drawer Clean when necessary: 1. Open the drawer as far as possible. 2. Push down the depression on the suction cup and pull the drawer out completely. 3. Clean the drawer under warm running water. Pull off the suction cup;... - Page 19 Cleaning the pump filter Drain off the water completely… • before cleaning the foreign matter trap; • before transporting the machine (e.g. when shifting house); • when there is a power failure ("emergency draining"); • when there is a danger of frost. At room temperatures below 0 °C the remaining water in the appliance could freeze, damaging it.
-
Page 20: Determining Location And Installation
Determining location and installation 1. Removing transport safety bolts at the rear of the machine The transport safety bolts must be removed before any operation of the machine. Bolt heads, marked “C”. “C”, should be turned in a anti clockwise direction until the bolt can be partially withdrawn. Remove transport safety bolts and rubber bushes by pulling outwards. - Page 21 2. Feet adjustment In order for quiet and stable operation, the machine should be placed properly and leveled on its feet. Your machine comes with two adjustable feet. If the machine is unstable, loosen the plastic counternut and screw or unscrew the adjustable foot until the machine is leveled perfectly. After positioning, tighten the counternut for stability.
- Page 22 b) Water drain hose Water drain hose could be placed either at the side of the bath tub, or directly to the drain. The hose should not be bent. Water drain hose should be secured with the elbow so that it would not fall down on the ground. The hose should be placed between 40 and 100 cm.
-
Page 23: Helpful Tips On Stain Removal
Helpful tips on stain removal The following stain removing tips are approximate and can only be used at the washable fabrics. Please consult the washing information of the fabric manufacturer. Alcoholic baverages: Wipe the fabric first with water, then water-glycerine solution and rinse with vinegar-water solution. Shoe polish: Without harming the fabric, remove the stain carefully and grind it with detergent. -
Page 24: Before Calling Service
Before calling service You turned the machine on, but the leds are off on the panel. Check the grounding on the power cable or a blown fuse. Check the front door proper closure. Machine does not take water. Check the front door for proper closure. Either taps are closed or water intake filters are clogged.