Installing the ODD
1. Place the ODD into the 5.25" ODD bracket.
2. Slide the ODD and lock the latch by a click.
3. Connect the optical drive data cable and optical drive power cable to the ODD.
4. Install the:
a.
front bezel
b.
side cover
5. Follow the procedure in
5.25 inch ODD bracket
Removing the 5.25 ODD bracket
1. Follow the procedure in
2. Remove the:
a.
side cover
b.
front bezel
c.
ODD
3. To remove the ODD bracket:
a. Remove the five screws[1,2] that secure the bracket to the chassis.
After working inside your computer
Before working inside your
computer.
Removing and installing components
41