Table of Contents
Advertisement
PackshotCompact
HARDWARE DISASSEMBLY
BACK AND BOTTOM LIGHT PANELS SEPARATION:
01
Unplug the two metal connectors.
04
Slide the back light panel away
from the two dowel screws, then
lift up and separate completely
from the bottom light panel.
02
Unplug the power connector.
05
The back light panel is very
Note:
heavy, recommend 2-4 people.
03
Remove six white hand screws,
three on each side.
06
Once the two panels are
separated, you can slide the
bottom background backward
and lay the bottom light panel
vertically, so as to move them
individually through small spaces.
Reverse steps
to
to reattach
01
05
the two light panels.
Advertisement
Table of Contents
