Table of Contents
Advertisement
PackshotCompact
HARDWARE DISASSEMBLY
SURROUNDING COVERS REMOVAL:
01
Unplug the studio and the top light
power cable.
CURVED BACKGROUND REMOVAL:
01
Remove two small white hand
screws and the holding bracket on
the top of the curved background.
02
Follow instructions from steps
to
in the "Acrylic Panel
01
04
Installation" part of this document
to remove the top and top light,
and then remove the acrylic panels
if any.
02
Lift to remove the curved
background from the system with
two people at opposite sides.
03
Lift to remove both side walls and
front door.
03
When re-installing
Note:
the curved background, we
recommend to slide it down with
two people at opposite sides. Use
one hand to brace and guide the
bottom corner into the curved rail
and then press it down until it flush
with the bottom background.
Advertisement
Table of Contents
