Sharp UA-HG60E Operation Manual page 13

Function
Sound Indicator Setting
You can set the unit to make a
beeping sound when the Water
Tank is empty.
Auto Restart
If the unit is unplugged or if there is
a power failure, the unit will resume
operation with the previous settings
after power is restored.
Adjusting Sensor Sensitivity (F4-F7)
Light Sensor
Dust(sensitive) Sensor
Odour Sensor
(UA-HG60E / UA-HG50E)
Motion Sensor
(UA-HG60E / UA-HG50E)
You can set the time until the Mo-
tion Sensor detects that no one is
in the room . You can also cancel
Motion Sensor sensing.
Patrolling Function Setting
You can set the unit to make a beep-
ing sound when Patrolling Light turn
to red.You can also cancel Patrolling
Function.
Setting
Cancellation
ON
Cancellation
ON
(default)
Low
Standard
High
ON(Standard sensing time )
ON(Longer sensing time)
Cancellation
ON(
notifi es with Patrolling Light and sound
The beeping sound continues for 30 seconds at
maximum.
Pressing any button on the operation panel
stops the sound. When Patrolling Light is red,
the beeping sounds hourly.
ON(
notifi es with Patrolling Light only
fault)
Cancellation
E-12
(default)
(default)
(default)
)
(de-
)