Technical Data - Electrolux HKK670MF User Manual

Problem
comes on.
and a number come on.
You can hear a constant beep
noise.
9.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the

10. TECHNICAL DATA

10.1 Rating plate
Model HKK670MF
Typ 62 B4A 21 AA
Induction 7.35 kW
Ser.Nr. .................
ELECTROLUX
10.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Right front 1400
Right rear 1800
20 ENGLISH
Possible cause
The diameter of the bottom of the
cookware is too small for the zone.
FlexiBridge (Flexible Bridge) oper‐
ates. One or more sections of the
function mode which operates are
not covered by the cookware.
PowerSlide operates. Two pots are
placed on the flexible induction
cooking area.
There is an error in the hob.
The electrical connection is incor‐
rect.
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about the
Service Centre and conditions of guarantee
are in the guarantee booklet.
PNC 949 599 175 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
PowerBoost [W]
2500
2800
Remedy
Use cookware with correct dimen‐
sions. Refer to "Technical data".
Place the cookware on the correct
number of sections of the function
mode which operates or change the
function mode. Refer to "Flexible in‐
duction cooking area".
Use only one pot. Refer to "Flexible in‐
duction cooking area".
Deactivate the hob and activate it
again after 30 seconds. If
again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
4 125 - 145
10 145 - 180
comes on