13
TEMPORARY OPERATION
TEMPORARY operation
This function is used to operate the unit temporarily in case you misplace the wireless remote controller or
its batteries are exhausted.
remote controller is not used, models with the auto-changeover (cooling/heating) function perform
HIGH).)
I cannot nd the
remote controller
Continuous pressing of the [RESET] button for 10 seconds and above will start the forced cooling
operation.
(This will impose burden on the air conditioner. Do not perform this for the purposes other than test run.)
In this time all indicators of indoor unit go on.
31-EN
A temporary
operation feature
is provided!
CAUTION
- 31 -