Handling The Remote Controller - Toshiba RAV-GM1101KRTP-E Owner's Manual

6

HANDLING THE REMOTE CONTROLLER

doors or other materials block the signals from
the remote controller to the indoor unit.
controller.
Do not expose the remote controller to direct
sunlight or heat.
is exposed to direct sunlight, the air conditioner
may not function properly.
Use curtains to prevent the sunlight from
reaching the receiver.
uorescent lighting with electronic starters,
signals may not be properly received. If you are
planning to use such uorescent lamps, consult
your local dealer.
controller move these appliances or consult your
local dealer.
Location of the remote controller
reach the receiver of the indoor unit (a distance
of 7 m is allowed).
controller automatically transmits a signal to the
indoor unit at the specied time.
If you keep the remote controller in a position that
hinders proper signal transmission, a time lag of
up to 15 minutes may occur.
7 m
17-EN
CAUTION
Remote controller holder
Installing the remote controller holder
holder on a wall or pillar, check whether the
remote controller signals can be received by the
indoor unit.
Mounting and removing the remote
controller
the remote controller holder and push it in fully.
To remove the remote controller slide the remote
controller upwards and out from the holder.
- 17 -