MTU 10V1600C Series Operating Instructions Manual page 64

33 – HI P-Diff-Fuel
Cause
The differential pressure
measured at sensors B34.1 and
B34.2 has violated limit value 1.
The differential pressure is too
high.
34 – SS P-Diff-Fuel
Cause
The differential pressure
measured at sensors B34.1 and
B34.2 has violated limit value 2.
The differential pressure is too
high.
36 – HI ETC2 Speed
Cause
The speed of the LP turbocharger
on the B side measured at sensor
B44.2 has violated limit value 1.
The turbocharger speed is too
high. Cause: Fault or malfunction
of another turbocharger.
37 – SS ETC2 Speed
Cause
The speed of the LP turbocharger
on the B side measured at sensor
B44.2 has violated limit value 2.
The turbocharger speed is too
high. Cause: Fault or malfunction
of another turbocharger.
51 – HI T-Lube Oil
Cause
The lube oil temperature
measured at sensor B7 has
violated limit value 1. The lube oil
temperature is too high.
52 – SS T-Lube Oil
Cause
The lube oil temperature
measured at sensor B7 has
violated limit value 2. The lube oil
temperature is too high.
64 | Troubleshooting | MS150100/06E 2017-08
Corrective action
1. Replace fuel filter (→ Page 113).
2. Contact Service.
Corrective action
1. Replace fuel filter (→ Page 113).
2. Contact Service.
Corrective action
1. Reduce power.
2. Contact Service.
Corrective action
1. Reduce power.
2. Contact Service.
Corrective action
1. Reduce power.
2. Check cooler and fan operation (plant).
3. Check engine coolant level (→ Page 139).
4. Contact Service.
Corrective action
1. Check cooler and fan operation (plant).
2. Check engine coolant level (→ Page 139).
3. Contact Service.