Advertisement
Three-Layer Printing for Backlit Panels
To minimize the difference between when the backlight is on or off, print the panel using three layers in the order
of Pattern – White – Pattern.
To print the entire printing area white, Print Control can be used for printing. Although the print data can include
a white print layer, this section introduces how to print white using Print Control.
[1], [3]: Pattern printing
[2]: White printing (Printing solid white using Print Control and adjusting the ink amount if too dark)
Procedure
A
Create the print data and save it as a rasterized file.
Create the print data using Adobe Illustrator or some other drawing software.
1
Use RIP software such as SAi FlexiPRINT to rasterize the print data.
2
Save the rasterized print data as a file.
3
B
Start Print Control and enter administrator mode.
C
Open the file saved in
The "Properties" window for the job appears.
D
Click [Print Mode].
The "Print Edit mode" window appears.
12
A
with Print Control, and double-click the added job.
Advertisement
