Fixed Interface Model - Epson TM-T88VII Technical Reference Manual

Fixed Interface Model

DIP Switch Bank
SW Function
1 Handshaking (BUSY condition)
2 Reserved (Do not change setting)
3
Selects print density
4
5 Reserved (Do not change setting)
6 Reserved (Do not change settings)
7 Reserved (Do not change settings)
8 Reserved (Do not change settings)
For DIP Switch 1 (BUSY condition), see also
Selecting the Print Density (DIP Switches 3/4)
Function
Do not set
Print density (standard)
Print density (medium)
Print density (dark)
• If the print density is set to "Medium" or "Dark" level, print speed may be reduced.
• The print density can be set with DIP switches (3/4) or the software settings. (See
Settings" on page
ON
Receive buffer full
See the " Selecting the Print Density (DIP Switches 3/4)"
table below.
"Selecting the BUSY Status" on page
SW 3 SW 4
ON ON
OFF OFF
ON OFF
OFF ON
59.)
Chapter 3 Advanced Usage
OFF
Offline
Receive buffer full
Fixed to OFF
Fixed to OFF
Fixed to OFF
Fixed to OFF
Fixed to OFF
58.
Default
setting
OFF
OFF
OFF
OFF
OFF
OFF
OFF
"Software
57