Dish Network SR200 User Manual page 5

Dish sr200: users guide
Hide thumbs Also See for SR200:
Table of Contents

Advertisement

Caution
Take the following precaution while setting up your SR200:
Don't push any buttons or perform any operations until updating has been completed. Once all
updated SIRIUS channels are received, the display will change to Call 1-888-539-SIRIUS to
Subscribe and will place you in SIRIUS Satellite Radio's Preview Channel. Channel 184 is the
SIRIUS preview channel. You will not be able to tune to any other channels until you activate
your SIRIUS subscription.
Note
If the unit doesn't seem to be working properly:
Turn the unit's power off, wait 5 – 10 seconds, then turn the power on again.
If the unit still mis-operates, turn the unit's power off, remove it from the cradle, wait 5 – 10
seconds, replace it in the cradle and turn the power back on. If the problem persists, consult
your dealer.
iii

Advertisement

Table of Contents
loading

Table of Contents