Removing Sr200 From The Dock; Basic Operation - Dish Network SR200 User Manual

Note: Don't push any buttons or perform any operations until updating has been completed. Once all updated
SIRIUS channel channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and
will place you in SIRIUS Satellite Radio's Preview Channel. Channel 184 is the SIRIUS preview channel. You
will not be able to tune to any other channels until you activate your SIRIUS subscription.
4. Press the MENU button to enter the Setup Mode. The SIRIUS ID Menu Option will be highlighted.
5. Push the NAVIGATION WHEEL to select SIRIUS ID. This will display your unit's unique 12-digit SIRIUS ID
(SID) number. This SID number should also be available on the SR200 packaging. Write the number down and
have your credit card handy.
6. Contact SIRIUS on the Internet at: https://activate.siriusradio.com/ Follow the prompts to activate your
subscription.
• You can also call SIRIUS toll-free at 1-888-539-SIRIUS (7474). The operator will instruct you.

Removing SR200 from the Dock

To remove SR200 from the docking station, press the button on the underside of the unit and gently slide SR200
out of the cradle. Replace it by sliding the unit all the way into the cradle so that the connector at the rear of the
unit makes proper contact in the cradle.

Basic Operation

After you have successfully activated your SIRIUS subscription, the Normal Operation screen will appear.
Use the NAVIGATION WHEEL to select channels.
The selected channel will automatically play the name and artist of the currently-playing song and will scroll
across the display. If you want to listen to a different entertainment category, push the CATEGORY button up or
down to activate the Category Select screen:
11