Table of Contents
Advertisement
2.
By holding down the MEMO button for 3 seconds, the stored memory
information (one at a time) is displayed on the screen in page format. Use the
NAVIGATION WHEEL to scroll through the 20 entries. This function allows
you to recall information regarding the Artist/Song Title for your own
personal review.
3.
Momentarily pressing the NAVIGATION WHEEL while in memory recall
mode results in a pop-up screen displaying two selectable options:
•
Delete
•
S-Seek
Turning the NAVIGATION WHEEL highlights the options and pushing the
NAVIGATION WHEEL selects the option. The S-Seek option implies
S-Seek On/Off, with the default setting as S-Seek On.
4.
Each time the SR200 is turned on, it automatically searches the incoming
signal to determine if a match exists between the signal and the currently
saved information stored in receiver memory. If one or more matches are
found, a pop-up screen momentarily appears for 2 seconds and displays the
phrase S-Seek Alert. An audible beep tone will be heard indicating that a
match has been found. The display then reverts to the S-Seek Alert screen
which displays the current matches. You can now select the Artist/Song
Title that you wish to listen to.
No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in
memory, the receiver will check the stored input data to ensure the information about to be stored is not already in
memory.
Memory Select Screen
Memory Recall Mode Screen
S-Seek Alert Screen
17
Advertisement
Table of Contents
