Table of Contents
Advertisement
Troubleshooting
Fault
SR200 does not turn on
Antenna Not Detected
display message
Audio static or loss of clarity
No signal on SR200 display
No Sound
30
Possible Cause
Blown Fuse, power cable not properly
connected.
Satellite antenna not connected. The
antenna or cable is faulty.
FM Frequency contains static.
Vehicle antenna not connected to the
radio.
Check for obstacles over or around
antenna.
The audio cables are not connected.
The car radio is set on the wrong
frequency.
Solution
Check fuse, check power cable.
Check satellite connection to
the SR200.
Contact the system installer or
vendor.
Switch to another FM
frequency.
Check the vehicle antenna
cable.
Change location to eliminate
interference from nearby
objects.
Check the audio cables.
Check the car radio's frequency.
Advertisement
Table of Contents
