1. Manuals
  2. Brands
  3. Dish Network Manuals
  4. Radio
  5. SR200
  6. User manual

Dish Network SR200 User Manual

Dish sr200: users guide
Hide thumbs Also See for SR200:
Table of Contents

Advertisement

Quick Links

Download this manual
DISH Network
SR200 User's Guide
130885

Advertisement

Table of Contents
loading

Related Manuals for Dish Network SR200

Summary of Contents for Dish Network SR200

  • Page 1 DISH Network SR200 User’s Guide 130885...

  • Page 2: For Your Safety

    Warning and Attention Symbols You must be aware of safety when you install and use this system. This User Guide provides various procedures. If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. The WARNING! symbol means that if you are not careful, You could injure or kill yourself, or You could damage equipment or property.

  • Page 3: Safety Precautions

    Warning Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this installation manual. DISH Network is not responsible for • issues arising from installations not performed according to the procedures in this manual.
  • Page 4 Warning Take the following precautions to prevent fire and avoid personal injury: • To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the unit. • If the unit emits smoke or strange smells, turn the power off immediately. •...
  • Page 5 Caution Take the following precaution while setting up your SR200: Don’t push any buttons or perform any operations until updating has been completed. Once all updated SIRIUS channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and will place you in SIRIUS Satellite Radio’s Preview Channel. Channel 184 is the SIRIUS preview channel.

  • Page 6: Table Of Contents

    SR200 Controls and Features ... 7 Remote Control Functions ... 9 Installing Batteries in the Remote ... 10 Activating your SIRIUS Subscription ... 10 Removing SR200 from the Dock ... 11 Basic Operation ... 11 Menu Display Options ... 19 SIRIUS ID ... 20 Time Based Features ...

  • Page 7: Box Contents

    CONGRATULATIONS! Your new SR200 portable Plug-n-Play from DISH Network lets you enjoy SIRIUS® Satellite Radio’s digital entertainment channels. Use this manual to familiarize yourself with all of SR200’s features and capabilities. Box Contents Unpack your SR200 carefully and make sure that everything listed here is present: •...
  • Page 8 Cigarette Lighter Power Cord If anything is missing or damaged, or if your SR200 fails to operate, notify your dealer immediately. If your SR200 was shipped to you directly, notify your shipper immediately. DISH Network recommends that you retain the original carton and packing materials in case you need to ship your SR200 in the future.

  • Page 9: Quick Start Guide

    Quick Start Guide After you have successfully installed the SR200 and activated your SIRIUS subscription, the Normal Operation screen will appear. The SR200 has four ways to find music: • Select Music with the NAVIGATION WHEEL. Turn the NAVIGATION WHEEL to find channels you like.

  • Page 10: Installation Instructions

    Do not install SR200 where it will hinder your access to the vehicle’s controls. • Do not install SR200 where it may hinder the function of safety devices such as an airbag. Doing so may prevent the air-bag from functioning properly in the event of an accident.

  • Page 11: Installation In A Vehicle: Mounting The Antenna

    Press the POWER button to turn SR200 on. If your SR200 has been properly connected and the antenna is receiving the SIRIUS signal you will hear audio. If you do not hear audio, the display will read Acquiring Signal. Reorient the antenna until you hear audio. See Antenna Aiming on page 24 to use the ANTENNA SIGNAL screen to aim the antenna.

  • Page 12: Installation In A Vehicle: Running The Antenna Cable

    Installation in a Vehicle: Running the Antenna Cable Turn SR200’s power off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle. Route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown below.

  • Page 13: Sr200 Controls And Features

    SR200 Controls and Features POWER Button Turns SR200 On and Off; exits the Channel, Category, Song and Artist List modes. NAVIGATION WHEEL Navigates through display screens and makes selections of items highlighted on the display. Clockwise increases or moves up in the menus. Counterclockwise decreases or moves down in the menus.
  • Page 14 Preset Number Buttons (0-9) Sets and selects preset channels. Memory (MEMO) Button (S-Seek Function) Saves and recalls artist names and song titles. You can store up to 20 artist/song title combinations. Band Button (P.Tune) Pressing and releasing switches between preset banks A, B, and C, which hold 10 presets each. Pressing and holding enables Preset Tune Mode, which allows for viewing and listening of stored presets with turn of the NAVIGATION WHEEL.

  • Page 15: Remote Control Functions

    Remote Control Functions POWER Button Turns SR200 on and off. CH+/ CH-/ CAT+/ CAT- Buttons Navigate through channels, categories, and display screens. Mute Button Mutes audio. PREVIOUS (PREV) Button Navigates back to previous channel. DIRECT Button Accesses channels directly by number.

  • Page 16: Installing Batteries In The Remote

    Activating your SIRIUS Subscription Before you can listen to SR200, you must subscribe to SIRIUS Satellite Radio’s service. Make sure that SR200 is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal. See Installation sections for details) Press the POWER button to turn SR200 on.

  • Page 17: Removing Sr200 From The Dock

    Removing SR200 from the Dock To remove SR200 from the docking station, press the button on the underside of the unit and gently slide SR200 out of the cradle. Replace it by sliding the unit all the way into the cradle so that the connector at the rear of the unit makes proper contact in the cradle.

  • Page 18: Selecting Music

    Selecting Music In addition to the Normal Operation and Category Select screens, SR200 has three ways to search for and select music: by channel, by artist, and by song. Selecting Music by Channel (Channel List Mode) Press and hold the DISPLAY (DISP) button for two seconds while in the Normal Operation mode.

  • Page 19: Direct Tuning

    Selecting Music by Artist (Artist List Mode) While the Channel List screen is active, press the DISPLAY (DISP) button once. The Artist List screen will appear, showing all currently-playing artists regardless of category. • If composer information is available for a channel, it will be displayed along with the artist information.

  • Page 20: Setting Channel Presets

    Setting Channel Presets You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 3 banks, A, B, and C, each containing 10 channel presets. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Normal Operation screen.

  • Page 21: Preset Tune Mode

    Preset Tune Mode When in the P.Tune Mode, press and hold the DISP button for 2 seconds; this exits normal preset tuning and enters a 6-line menu mode which displays the Preset Number (A-1, for example), a single space and the 20-character channel name.
  • Page 22 SIRIUS signal and alert the user when a saved song is being played. While the SR200 is in either of the two standard display modes, momentarily pressing and releasing the MEMO button stores the current program data information within the SR200’s memory. A Memory Stored pop-up screen, followed by X Used / Y Empty will each appear for 1 second.
  • Page 23 NAVIGATION WHEEL selects the option. The S-Seek option implies S-Seek On/Off, with the default setting as S-Seek On. Each time the SR200 is turned on, it automatically searches the incoming signal to determine if a match exists between the signal and the currently saved information stored in receiver memory.
  • Page 24 If one or more matches are found, a display list appears, and allows you to scroll through the list of songs using the NAVIGATION WHEEL. Once a song is found, it can be selected by pressing the NAVIGATION WHEEL, and the display will revert to either of the selected display modes. If a selection is not chosen within 10 seconds after the last action, the screen will revert to the previously selected display and tuning mode.

  • Page 25: Menu Display Options

    Menu Display Options To enter the Menu Options page, press and hold the MENU Button. The Menu Options list will appear on the LCD display. Using the NAVIGATION WHEEL, highlight the option you wish to adjust and press the NAVIGATION WHEEL to make the selection.

  • Page 26: Sirius Id

    SIRIUS ID Displays your 12 digit SIRIUS ID number. No adjustments are allowed in this mode. To exit this option, press the NAVIGATION WHEEL or MENU Button. Display Settings The following adjustments are possible: Dimming Control Contrast Control To enter either of these modes, use the NAVIGATION WHEEL to highlight the option you wish to adjust and the press the NAVIGATION WHEEL to make the selection.

  • Page 27: Fm Transmitter Options

    FM Transmitter Options The following adjustments are possible: FM On/Off Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the FM On or FM Off function/display selection. To select and exit this function, press the NAVIGATION WHEEL. No button activity for 10 seconds will also exit this function.

  • Page 28: Lock Options

    Lock Options Upon entering this mode for the first time, the user is prompted to enter the default four digit numerical code. All future entries into this mode display a channel list with the current channel in play highlighted. The NAVIGATION WHEEL is used to navigate the list and highlight the channel to be locked or unlocked.

  • Page 29: Edit Code

    Edit Code Upon entering this mode, the user is prompted to enter the current four digit numerical lock code. Once the correct code has been entered, the user is prompted to enter a new 4-digit code twice. The second entry is requested for confirmation.

  • Page 30: Time Based Features

    Antenna Aiming Upon entering this mode, a 10 segment horizontal bar graph is displayed with a Minus (-) sign to the left and a Plus (+) sign to the right. The current setting is indicated on the bar graph. Moving the antenna location adjusts the bar graph signal strength indication, thus ensuring optimum reception.
  • Page 31 Clock When entering this menu option, you can set up the clock shown on the Normal Operation screen, based on the format desired, and the time zone in which you reside. The clock data is provided via the SIRIUS Satellite channel, and will update based on the received signal.

  • Page 32: Alarm Clock

    Alarm Clock When this menu option is highlighted and selected, you will be able to set the unit to turn on at a specific time. The last selected channel prior to shutdown will be present when the Alarm feature is activated. Alarm appears on the first line of the display followed by the alarm options: Set Alarm (Default-Off) Use the NAVIGATION WHEEL to toggle between Alarm On or Alarm Off and press the NAVIGATION...

  • Page 33: Auto Shutdown

    Time/Day Rotating the NAVIGATION WHEEL toggles between Time and Day. If Time is selected, use the NAVIGATION WHEEL increase (clockwise) or decrease (counterclockwise) the set time in a circular motion on one line in the middle of the display from the default value (12:00pm). When the desired time is displayed, press the NAVIGATION WHEEL.

  • Page 34: Sleep Mode

    Cancel Auto Shutdown Press the NAVIGATION WHEEL to terminate the function temporarily. The following options are available in this mode: • Enabled • Disabled (Default) Rotate the NAVIGATION WHEEL to toggle between Enabled and Disabled. When the desired shut down status is highlighted, press the NAVIGATION WHEEL.

  • Page 35: Factory Default

    Factory Default The Factory Default screen displays the text Restore Settings with the options: Yes/No. Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the Yes or No function display selection. If Yes is chosen, the unit reverts to the original factory settings for the following parameters: •...

  • Page 36: Troubleshooting

    Troubleshooting Fault SR200 does not turn on Antenna Not Detected display message Audio static or loss of clarity No signal on SR200 display No Sound Possible Cause Blown Fuse, power cable not properly connected. Satellite antenna not connected. The antenna or cable is faulty.

  • Page 37: Specifications

    Specifications Audio Output ... 2.2V (Peak-to-Peak) Total Harmonic Distortion (THD) ... <0.3% Signal-to-noise (S/N) ... Greater than 75dB Fuse Requirement ... 3A Slow Blow Power Supply ... 10-16V, Negative Ground, DC Receiver Dimensions ... 138mm(W) x 92mm(H) x 48mm(D) ... (5-3/8” W x 3-5/8” H x 1-7/8” D) Receiver Weight ...

  • Page 38: Warranty

    Limited Warranty This Limited Warranty is a legal document. Keep it in a safe place. Remember to retain your Bill of Sale for warranty service! Any items returned without a copy of the Proof of Purchase will be considered out of warranty. What the Warranty Covers This warranty extends only to the original user of the equipment and is limited to the purchase price of each part.
  • Page 39 What the Warranty Does Not Cover This warranty does not cover installation of the system. If applicable, such installation will be warranted under a separate installation agreement. This warranty does not cover consumer instruction, physical setup or adjustment of any consumer electronic devices, remote control batteries, signal reception problems, loss of use of the system, or unused programming charges due to system malfunction.
  • Page 40 Legal Limitations REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ECHOSTAR SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS SYSTEM, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS SYSTEM.

  • Page 41: Fcc Warning

    Returned equipment must be packaged properly, using either the original shipping materials or the packaging in which the replacement equipment is shipped. Include a copy of the Bill of Sale. Any items returned without a copy of the Proof of Purchase will be considered out of warranty. Follow the instructions given to you by the Customer Service Representative.
  • Page 42 Notes...
  • Page 43 Send any comments or questions to: EchoStar Technologies Corporation, Technical Publications, 94 Inverness Terrace East, Englewood, Colorado 80112 Part Number: 130885 DISH Network is a registered trademark of EchoStar Satellite L.L.C. For information about DISH Network, visit our website at www.dishnetwork.com.

Table of Contents