Advertisement
Unit Covers
Locate the unit you are working on.
v "270, 810 and 820 system units"
v "825 unit" on page 31
v "270 or 810 unit in a rack" on page 31
270, 810 and 820 system units
To access the memory location, you need to remove the back cover (
video), if you have one, and the side cover (
__ 1. Place your hand near the bottom of the back cover and lift up and out.
__ 2. Attention: If you are removing the side cover while it is powered on, errors
__ 3. Pull the cover out.
© Copyright IBM Corp. 2000, 2003
may occur due to electromagnetic interference.
Remove the right side cover (view from back) by loosening the thumbscrews
and sliding the cover from front to back until it stops.
view video):
view
29
Advertisement
