Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Disc Makers Manuals
  4. Computer Hardware
  5. Reflex1
  6. Manual

Disc Makers Reflex1 Manual

Dvd/cd duplicator
Hide thumbs Also See for Reflex1:

Advertisement

Quick Links

Download this manual See also: User Manual
Welcome!
Our duplicator is a reliable, high performance, high speed, standalone DVD/CD duplicator. With
its professional industrial design and simple user interface, it will make your duplicating
experience easier than ever.
******************************************************
Before you start:
Before you start using this duplicator, please read the following to ensure proper operation:
1.
DVD Duplication Limitations:
This duplicator, it will not copy any DVD that has Copy Protection encoded inside. DVDs
you purchase or rent from a store will be Copy Protected.
In addition to the copy protection limitation, the duplicator will only copy a DVD-5 format
(4.7GB) disc to DVD-5 format (4.7GB) recordable DVD media. If your duplicator has
double layer capability, you can copy a DVD-9 format (8.5GB) disc to DVD-9 format
(8.5GB) recordable DVD media. You cannot duplicate a DVD5 format disc to a DVD9
format recordable media or vice versa.
2.
Temperature Warning:
If the duplicator was stored in a location where the temperature dropped below 32°F (0°C)
within the past 24 hours, please leave the duplicator in a warm room with temperatures at
least 65°F (19°C) for 4 hours prior to powering it on for the first time. Failure to do so may
cause irreparable harm and prevent the duplicator from functioning.
3.
Maintenance:
It is very important to operate and keep the duplicator in a dust free, clean environment since
dust is the number 1 killer for CD/DVD recording devices. Failure to do so may severely
damage your duplicator. We strongly suggest you place an Air Cleaner next to the duplicator
and constantly use the Air Duster (Can Air) to clear off any dust on the surface of the
duplicator.
Do not try to use Air Duster to clean the duplicator while the reader/writer trays
are open. In doing so, you may inadvertently blow dust into the recording
device and damage the recording device.
4.
Proper Shutdown:
To avoid possible system failures the duplicator must be shutdown properly. To shutdown the
duplicator, use the UP or DOWN arrow keys or the "Shutdown" hot key and follow
instructions on the screen. Turning off your duplicator without performing this function will
increase the risk of damaging your duplicator.
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the Reflex1 and is the answer not in the manual?

Questions and answers

Related Manuals for Disc Makers Reflex1

Summary of Contents for Disc Makers Reflex1

  • Page 1 Welcome! Our duplicator is a reliable, high performance, high speed, standalone DVD/CD duplicator. With its professional industrial design and simple user interface, it will make your duplicating experience easier than ever. ****************************************************** Before you start: Before you start using this duplicator, please read the following to ensure proper operation: DVD Duplication Limitations: This duplicator, it will not copy any DVD that has Copy Protection encoded inside.
  • Page 2 Once powered on, you should see the following when your duplicator is ready. (If this screen does not appear, make sure the USB switch in the rear of the unit is not in the “ON” position) Disc Makers 1.Copy Disc Insert a master DVD / CD into the reading drive, which is the first drive.
  • Page 3 recordable disc may not be blank. Try changing to another blank DVD-R / DVD+R / CD-R disc. If you are using a DVD-RW / CD-RW disc to duplicate, you need to perform [QuickEraseDisc] to remove data before you can burn new data. The DVD / CD Duplicator will start to analyze the format of the master disc, and continue to duplicate if the master disc is readable.
  • Page 4 completed and the following will appear. Waiting… Blank Disc Add more blank media and repeat the process until you have reached the desired number of copies you require or press ESC to return to the main menu. If your source disc is DVD format, you need a DVD-R / DVD-RW / DVD+R / DVD+RW disc in order to make a copy.
  • Page 5 CD-R disc to make it readable. Once powered on, you should see the following when your duplicator is ready. Disc Makers 1.Copy Disc Press UP button consecutively until you see following: DVD Duplicator 3.Copy Track...
  • Page 6 If you see following error message: Error … Master > Blank You have selected too many tracks. You need to insert a new CD-R / CD-RW disc or remove some tracks from your current editing list. The duplicator will copy the selected tracks to the blank disc in the recording drive. While it is copying, you shall see following progress screen.
  • Page 7 Total tracks of this CD Track 07 27:40 Free 46:33 Free disc space And press ENT once again to confirm your action. You will not be able to use the personal audio CD if you don’t close (finalize) the disc. Once you finalize the disc by executing [Close Disc] function, you will not be able to add more tracks onto the disc.
  • Page 8 Setup Guide I. Setup USB 2.0 device(s) For first time use 1. Turn your duplicator off if it is running. 2. Turn your computer off if it is running. 3. Set the IEEE 1394 Firewire/USB2.0 switch to “ON” at the back of your duplicator. 4.
  • Page 9 Due to the physical limitation of DVD+R recordable format, you can not perform this procedure if your recordable discs are DVD+R. If you do so, you will encounter failure messages. If you are using CD/DVD ReWritable discs during the simulation, all of the content inside those discs will be ereased permanently.
  • Page 10 System This function provides information about your current system status and perform system related functions. 7.1 Function [7.1 Show DVD-ROM] / [7.1 Show CD-ROM] displays the model name and version of Reader Drive. 7.2 Function [7.2 Show DVD-RW] / [7.1 Show CD-RW] displays the model name and version of Recording drive.

  • Page 11: Troubleshooting

    Troubleshooting: No display on LCD or the unit does not operate when the power is on. Check the connection of power cable and the environment of power outlet is normal. Make sure the power voltage matches the voltage of your power outlet. If your outside temperature has dropped below 34F within past 24 hours, duplicator inside a room with temperature of 65F or higher for 4 hours before powering it READER cannot read disc and shows error message.
  • Page 12 If a DVD-R / CD-R disc is inserted in the DVD-R/RW drive and you are executing [QuickEraseDisc] function. The LCD will display: Error … Not CD-RW Disc DVD-R / CD-R discs are not erasable. Please change to DVD-RW / CD-RW disc. If you are executing [Copy Track] function and selecting audio tracks, the LCD displays the below error message.