Virtualization Support; Wireless Options; Maintenance - Dell OptiPlex 3080 Micro Setup And Specifications

Table 27. POST Behavior (continued)
Option
Warnings and Errors

Virtualization support

Table 28. Virtualization Support
Option
Virtualization
VT for Direct I/O

Wireless options

Table 29. Wireless
Option
Wireless Device Enable

Maintenance

Table 30. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Description
This option causes the boot process to only pause when warning or errors are detected.
Choose any one of the option:
● Prompt on Warnings and Errors - default
● Continue on Warnings
● Continue on Warnings and Errors
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by the Intel Virtualization technology.
● Enable Intel Virtualization Technology
This option is set by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
● Enable VT for Direct I/O
This option is set by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Controls the SERR message mechanism. This option is set by default. Some graphics cards
require that the SERR message mechanism be disabled.
Allows you to flash previous revisions of the system firmware.
● Allow BIOS Downgrade
This option is set by default.
Description
Allows you to enable or disable the internal wireless devices.
The options are:
● WLAN/WiGig
● Bluetooth
All the options are enabled by default.
BIOS setup 31