Advertisement
Post remover
•
Mount the end with the M10×65 screw, the M10 washer and the M10 nut on the bracket unit
(see Fig. 18).
•
Insert the handle into the mounting hole of the bracket and secure it with the 9.5×38 mm quick
release pin (see Fig. 19).
•
Then lock the hook assembly to the bracket assembly with the 9.5×68 mm quick release pin
(see Fig. 20).
Note!
The hook assembly must snap into the second hole (see arrow in Fig. 20).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61127
Page 7
05
2021-1
Advertisement
