Advertisement
Log carrier
•
Mount the end with the M10×65 screw, the M10 washer and the M10 nut on the bracket unit
(see Fig. 15).
•
Lock the hook assembly in the mounting hole of the mounting unit with the 9.5×68 mm quick
release pin. The two mounting holes are optional depending on the respective situation (see
Fig. 16).
•
Finally insert the steel handle into the mounting hole on one of the brackets (without end piece)
(see Fig. 14).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61127
Page 6
05
2021-1
Advertisement
