Simplicity Massey Ferguson Agco Allis 1692934 Operator's Manual page 10

Maintenance
Drive Shaft Lubrication
Lubricate the universal joints at both ends of the
snowthrower drive shaft with lithium grease. Also lubri-
cate the grease zerk in the middle of the shaft (see
Figure 5).
Check Gear Box Oil
1. Remove and retain the four capscrews, lockwashers,
and flange nuts (A, Figure 6) securing the gear box
plate.
2. Rotate the gear box to access the top fill plug (see
Figure 7).
3. Remove the fill plug using a 1/4" Allen wrench.
4. Access the back level plug through the oblong hole in
the top of the snowthrower (see Figure 8).
5. Remove the plug using a 1/4" Allen wrench.
6. While holding the gear box level, add Simplicity
Winter Weight Worm Gear Oil to the fill hole until oil
runs out the level hole.
7. Reinstall the fill plug and level plug.
8. Pivot the gear box back into position and secure the
plate using the hardware removed in step 1.
Figure 8. Level Plug Location
Figure 5. Drive Shaft Lubrication
Figure 6. Remove Plate Hardware
A. Capscrew, Lockwasher, & Flange Nut
Access
Level Plug
Here
Figure 7. Fill Plug Location
6
A
Fill Plug