Daewoo DCS2016E User Manual page 9

• Make sure that you can stand firmly and safely in each work position. When work- ing on a sloping
subsurface, be espe- cially careful!
• Always hold the device firmly in both hands. Use your right hand to grip the rear handle, your left
hand to grip the other handle, even if you are left-handed. Do not let go of the handles!
• When the saw is running, keep all body parts away from the saw chain. Make sure before starting
• Make sure that you can stand firmly and safely in each work position. When work- ing on a sloping
the saw that the saw chain does not touch anything.
subsurface, be espe- cially careful!
• Never saw above shoulder height! Do not lean forward or back!
• Always hold the device firmly in both hands. Use your right hand to grip the rear handle, your left
• Always ensure that you are standing firmly and only use the chain saw when you are standing on
hand to grip the other handle, even if you are left-handed. Do not let go of the handles!
stable, firm and level ground. A slippery subsurface or instable standing area such as on a ladder
• When the saw is running, keep all body parts away from the saw chain. Make sure before starting
can cause you to lose your balance or lose control over the chain saw.
the saw that the saw chain does not touch anything.
• Do not stretch your arms too far forwards.
• Never saw above shoulder height! Do not lean forward or back!
• Never work on ladders, on trees or in other positions in which you cannot stand safely.
• Always ensure that you are standing firmly and only use the chain saw when you are standing on
• Take care when walking backwards. Dan- ger of stumbling!
stable, firm and level ground. A slippery subsurface or instable standing area such as on a ladder
• Always saw at a high chain speed.
can cause you to lose your balance or lose control over the chain saw.
• Do not saw any wood which is under ten- sion.
• Do not stretch your arms too far forwards.
• Do not work alone! Ensure that you have an aural, visual or other connection with another person
• Never work on ladders, on trees or in other positions in which you cannot stand safely.
who is in a position to administer first aid in emergency situa- tions.
• Take care when walking backwards. Dan- ger of stumbling!
• With each change of location, switch the motor off and activate the chain brake. The device may
• Always saw at a high chain speed.
only be carried with the saw rail facing towards the back and a protective cover on.
• Do not saw any wood which is under ten- sion.
• Never operate the device in moist or wet environments.
• Do not work alone! Ensure that you have an aural, visual or other connection with another person
• Always keep the cable out of the working area of the device. Always guide the cable behind the
who is in a position to administer first aid in emergency situa- tions.
device.
• With each change of location, switch the motor off and activate the chain brake. The device may
• If necessary, only use extension cables suitable for the device and its environ- ment.
only be carried with the saw rail facing towards the back and a protective cover on.
• Symbols appearing on your product may not be removed or covered. Information on the product
• Never operate the device in moist or wet environments.
that are no longer legible must be replaced immediately.
• Always keep the cable out of the working area of the device. Always guide the cable behind the
device.
Observe the safety instructions before using the product for the first time.
• If necessary, only use extension cables suitable for the device and its environ- ment.
Read and observe the operating instruc- tions before commissioning.
• Symbols appearing on your product may not be removed or covered. Information on the product
Protect the device from wet conditions. Store in a dry location.
that are no longer legible must be replaced immediately.
Remove the plug from the mains imme- diately if the cable is damaged or cut.
Observe the safety instructions before using the product for the first time.
Personal protective equipment/sensi- ble clothing
Read and observe the operating instruc- tions before commissioning.
When cutting, wear the following protective equipment:
Protect the device from wet conditions. Store in a dry location.
Remove the plug from the mains imme- diately if the cable is damaged or cut.
Head protection: safety helmet with visor / Ear protection: earplugs/ear muffs according to DIN
EN 352-1 / Eye protection: wrap-around gog- gles/protective visor on the helmet
Personal protective equipment/sensi- ble clothing
Foot protection: safety shoes with gripping soles, steel caps and leg protection
When cutting, wear the following protective equipment:
Hand protection: work gloves of leather
Clothing: safety overalls (cut-proof) Safety jacket (cut-proof)
Head protection: safety helmet with visor / Ear protection: earplugs/ear muffs according to DIN
EN 352-1 / Eye protection: wrap-around gog- gles/protective visor on the helmet
Avoid with your clothing that you get caught on something:
Foot protection: safety shoes with gripping soles, steel caps and leg protection
• Wear only close-fitting clothing!
Hand protection: work gloves of leather
• Do not wear any jewellery!
Clothing: safety overalls (cut-proof) Safety jacket (cut-proof)
• If you have long hair, wear a hair net!
Kickback precautions:
Avoid with your clothing that you get caught on something:
Residual risks
1. Maintain a firm drip with thumbs and fingers encircling the chain saw hands, with both hands on the
• Wear only close-fitting clothing!
Even when using correctly, there is still a ele- ment of residual risk that cannot be excluded.
saw and position your body and arm to allow you to resist kickback forces
• Do not wear any jewellery!
• Contact with the unprotected saw chain (injury by cutting)
2. Do not overreach and do not cut above shoulder height
• If you have long hair, wear a hair net!
• Expulsion of parts of the saw chain
3. Only use replacement bars and chains specified by the manufacturer.
Residual risks
Even when using correctly, there is still a ele- ment of residual risk that cannot be excluded.
• Contact with the unprotected saw chain (injury by cutting)
• Expulsion of parts of the saw chain
8
9
8
www.daewoopower.bg