Heating Cycle Rate - Honeywell RTH1100 Quick Installation Manual

Advanced Installation Guide

Heating cycle rate

Note: Make sure system switch is in the heat position.
Press the s or t button to select your heating
system and optimize its operation:
4 Gas or oil furnace: Use this setting if you have a
standard gas or oil furnace that is less than 90% effi-
cient.
6 Electric furnace: Use this setting if you have any type
of electric heating system.
3 Hot water or high-efficiency furnace: Use this set-
ting if you have a hot water system or a gas furnace of
greater than 90% efficiency.
2 Gas/oil steam or gravity system: Use this setting if
you have a steam or gravity heat system.
69-2446ES—01
M32044
M29998
16
When correct set-
ting is selected,
move system
switch to the
cool position to
display next func-
tion.