Honeywell RTH1100 Quick Installation Manual page 8

Quick Installation Guide
6
Connect Wires (typical wiring)
1. Match each labeled wire with the terminal having the
same letter.
Remove jumper if
you have both R
and Rc wires.
2. Loosen the terminal screws using a screwdriver, insert
the wires, then lighten the screws.
3. Push any excess wire back into the wall opening.
Labels don't match?
If a wire does not match any terminal designation, see next page.
69-2446ES—01
Rh Rc
6
W Y G
M29990