KTM SX-E 5 2021 Owner's Manual page 70

14 BRAKE SYSTEM
68
–
Remove screw
–
Press back the brake linings by slightly tilting the brake caliper
laterally on the brake disc. Carefully pull the brake caliper
backward from the brake disc.
–
Press the brake piston back into the basic position and ensure
that brake fluid does not flow out of the brake fluid reservoir,
extracting some if necessary.
E00748-10
–
Remove lock ring
–
Remove screw
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in
the holding spring.
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
Warning
Danger of accidents Oil or grease on the brake discs
E00750-10
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Check the brake discs. (
–
Position the brake caliper, mount screw
Guideline
Screw, front
brake caliper
–
Mount and tighten screw
Guideline
Screw, front
brake caliper
E00748-10
4 5
and .
6
.
7
.
7
.
M5 8 Nm (5.9 lbf ft)
6
.
p. 63)
4
, and tighten.
M8x60 20 Nm (14.8 lbf ft)
5
.
M8x40 20 Nm (14.8 lbf ft)
Loctite ® 243™
Loctite ® 243™