13 SERVICE WORK ON THE CHASSIS
50
Condition
Individual installation position
–
Position the fork legs.
Guideline
Observe the position determined during removal.
Bleeder screws
Condition
Standard installation position
F02179-11
–
Position the fork legs.
Bleeder screws
The second milled groove (from the top) is flush with
the upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
M01813-10
–
4
Tighten nut
Guideline
Nut, steering head
–
Tighten screw
Guideline
Screw, top triple
clamp
–
Using a plastic hammer, tap lightly on the upper triple clamp
M01670-10
to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Fix the magnetic switch cable to the handlebar with a new
cable tie.
–
Position the brake caliper, mount screw
Guideline
Screw, front
brake caliper
–
Mount and tighten screw
Guideline
Screw, front
brake caliper
M01665-11
–
Position the brake line and the clamp. Mount and tighten
bl
screws
.
5
are positioned toward the rear.
5
are positioned toward the rear.
6
.
M8
15 Nm (11.1 lbf ft)
.
M20x1.5
10 Nm (7.4 lbf ft)
7
.
M8
20 Nm (14.8 lbf ft)
8
.
M8
20 Nm (14.8 lbf ft)
9
M8x60
20 Nm (14.8 lbf ft)
bk
.
M8x40
20 Nm (14.8 lbf ft)
, and tighten.
Loctite
®
243™
Loctite
®
243™