2.6
Connection variants and cable output directions
DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44 • 06.97
A cable connection box is generally used for the MKE motor power and
feedback connections. The desired cable output direction can be set at
the time of mounting by turning the cable connection box.
Fig. 2-9: Possible cable output directions
Note:
The cable output direction set at the factory can be altered at
the time of mounting. Please see section, 11.4 „Connecting
the motor", page 11-2.
Mechanical integration into the machine
MKE
2-9