Advertisement
2
Attach the white belt to
the eye-bolt using the
belt clamps to install
onto the belt bracket.
Install the eye-bolt
into one belt bracket,
stretch white belt the
length of the frame,
belt teeth facing up.
Attach the other end
of the white belt to the
remaining eye-bolt and
install onto opposite
belt bracket. (Use the
belt clamp to eliminate
excess belt length.)
3
Release the belt lock
lever and run the belt
as shown with the teeth
facing up.
Then reengage the lock
lever.
*Images not representative of
Momentum frame
Page 15
Advertisement
