Safety Standards (Ds-Ri2/Ds-Qi2) - Nikon DS-Ri2 Instructions Manual

Power
Operating environment
Storage environment

Safety Standards (DS-Ri2/DS-Qi2)

7.3
7.3
Conforming standards
Chapter 7
Major Specifications
Input rating:
Power consumption:
Temperature:
Humidity:
Altitude:
Pollution degree:
Indoor use only
Temperature:
Humidity:
• CE marking
Low Voltage Directive
EMC Directive
• GS mark
• C-UL-US Listed
• FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
• CAN ICES-003(A)/NMB-003(A)
• Australian AS/NZS CISPR22 Class B
• VCCI-A
Note: This is a Class A product based on the standard of the VCCI Council. If this
equipment is used in a domestic environment, radio interference may occur, in
which case, the user may be required to take corrective actions.
21
12 VDC±5%, 2.1 A
24 VA
0 to +40C
60% RH Max at +40C (no condensation)
2000 m Max
Degree 2
-20 to +60C
90% RH Max (no condensation)