AJAX ReX User Manual page 5

3. Click Add — the countdown begins.
4. Turn on ReX by pressing the power button for 3 seconds — shortly after
connecting to the hub the logo will change its color from red to white within 30
seconds after ReX is switched on.
In order for detection and interfacing to occur, ReX must be located within radio
communication range of the hub (on the same guarded facility).
The request for connection to the hub is transmitted for a short time at the time of
switching on the device. If the connection to the hub fails, turn off the extender by
pressing the power button for 3 seconds and retry the connection procedure after 5
seconds.
The extender connected to the hub will appear in the list of hub devices in the
application. The updating of device statuses in the list depends on the polling time